3com 8807 User Guide

Perform the following configuration in system view.

By default, MIB is bound to the first enabled OSPF process.

The OSPF Trap function enables the switch to send multiple types of SNMP Trap 
packets in case of OSPF process exceptions. In addition, you can specify an OSPF 
process ID so that this functions works only on that process. If no process ID is 
specified, this function works on all OSPF processes.

Perform the following configuration in system view.

By default, OSPF TRAP function is disabled. That is, the switch does not send TRAP 
packets when any OSPF process is abnormal.

For detailed configuration of SNMP TRAP, refer to the module "System 
Management" in this manual.

Table 302   Configure OSPF MIB binding

Configure OSPF MIB binding 

ospf mib-binding process-id 

Restore the default OSPF MIB binding 

Table 303   Enable/Disable OSPF TRAP function

Enable OSPF TRAP 
function 

snmp-agent trap enable ospf [ process-id ] [ ifstatechange | 
virifstatechange | nbrstatechange | virnbrstatechange | 
ifcfgerror | virifcfgerror | ifauthfail | virifauthfail | ifrxbadpkt | 
virifrxbadpkt | iftxretransmit | viriftxretransmit | originatelsa | 
maxagelsa | lsdboverflow | lsdbapproachoverflow ] 

Disable OSPF TRAP 
function 

undo snmp-agent trap enable ospf [ process-id ] [ 
ifstatechange | virifstatechange | nbrstatechange | 
virnbrstatechange | ifcfgerror | virifcfgerror | ifauthfail | 
virifauthfail | ifrxbadpkt | virifrxbadpkt | iftxretransmit | 
viriftxretransmit | originatelsa | maxagelsa | lsdboverflow | 
lsdbapproachoverflow ]

Table 304   Configure OSPF GR

Enter system view 

system-view 

- 

Enter OSPF view 

ospf [ process-id [ [ router-id 
router-id ] vpn-instance 
vpn-instance-name ] ] 

- 

Configure GR 

graceful-restart [ value ] 

Required

The time is 120 s by default