3com 2500 User Guide

When you define an IP LIS interface, you specify several general IP 
interface characteristics and IP LIS characteristics. 

Before you define an IP LIS interface with SVCs, be sure that you have 
defined an ATM ARP server, as described in the section “Administering 
ATM ARP Servers” later in this chapter. If the LIS interface has only PVCs, 
you do not need to define an ATM ARP server.

To define an IP LIS interface:

1 From the top level of the Administration Console, enter:

2 You are prompted for the interface’s parameters. 

To accept the existing value in brackets, press Return at the prompt.

3 Enter the IP address of the interface.

4 Enter the subnet mask of the network to which you want to connect the 

interface. 

5 Enter the type of IP interface:

6 Enter the LIS information:

■

For a LIS interface with SVCs — Enter the ATM ARP server 
address, the maximum SVC count, the inactivity timer, the 
minimum holding time, and the ATM port associated with the 
interface. Press Return to accept the existing values shown in 
brackets.

■

For a LIS interface with only PVCs — Enter the ATM port and 
the PVCs associated with the interface. You can enter up to 51 
PVCs for each interface. (The maximum number of PVCs on the 
CoreBuilder 2500 system is 64.)

LIS interface example with both PVCs and SVCs:

system
ethernet
fddi
atm
bridge

➧

ip
ipx
appletalk
snmp
analyzer
script
logout

➧

interface
route
arp
atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
ospf
rip
ping
statistics

display

➧

define
modify
remove
addPvc
removePvc

Enter IP address: 158.101.1.1
Enter subnet mask [255.255.0.0]: 255.255.255.0
Enter interface type (vlan,lis) [lis]:
Enter ATM arp server address
[00-0000-00-000000-0000-0000-0000-000000000000-00]:47-0000-00-000000-
00000000-00cc -000000000001-ff
Accept completed ATM address (yes,no) [yes]:
Enter max. SVC count (0=no max.0) [0]:
Enter inactivity time (0=infinite, 10-10000) seconds [1200]:
Enter min. holding time (0-10000) seconds [60]:
Select ATM port [1]:
Enter PVC(s) (VPI/VCI)[]: 1/32,1/200,1/3330