3com 2928 User Guide
3-6
Logging In to the CLI
The login process requires a user name and password. The default user name for first time
configuration is admin, no password is required. User names and passwords are case sensitive.
To logon to the CLI Interface:
configuration is admin, no password is required. User names and passwords are case sensitive.
To logon to the CLI Interface:
Step1
Press Enter. The Username prompt displays:
Login authentication
Username:
Step2
Enter your User Name at the Username prompt.
Username:admin
Step3
Press Enter. The Password prompt display
Password:
The login information is verified, and displays the following CLI menu:
<3Com Baseline Switch>
If the password is invalid, the following message appears and process restarts.
% Login failed!
CLI Commands
This Command section contains the following commands:
To do…
Use the command…
Displays a list of CLI commands on the device
?
Reboot the device and run the default configuration
initialize
Specify VLAN-interface 1 to obtain an IP address
through DHCP or manual configuration
ipsetup
{ dhcp | ip address ip-address
{ mask | mask-length } [ default-gateway
ip-address
ip-address
] }
Modify the login password of a user
password
Download the Boot ROM program or boot file from the
TFTP server and specify it to be used at the next startup
upgrade
server-address source-filename
{ bootrom | runtime }
Reboot the device and run the main configuration file
reboot
View the summary information of the device
summary
Ping a specified destination
ping host
initialize
Syntax
initialize
Parameters
None