3com 2928 User Guide

 

3-10 

z

 

If the main configuration file is corrupted or does not exist, the device cannot be rebooted with the 
reboot

 command. In this case, you can specify a new main configuration file to reboot the device, 

or you can power off the device, and then power it on, and the system will automatically use the 
backup configuration file at the next startup. 

z

 

If you reboot the device when file operations are being performed, the system does not execute the 
command to ensure security. 

# If the configuration does not change, reboot the device. 

<Sysname> reboot 

 Start to check configuration with next startup configuration file, please wait.........DONE! 

 This command will reboot the device. Continue? [Y/N]:y 

 Now rebooting, please wait... 

# If the configuration changes, reboot the device. 

<Sysname> reboot 

 Start to check configuration with next startup configuration file, please wait.........DONE! 

  This command will reboot the device. Current configuration will be lost in next startup if 

you continue. Continue? [Y/N]:y 

 Now rebooting, please wait... 

None 

Use the summary command to view the summary information of the device, including the IP address of 
VLAN-interface 1, and software version information. 

# Display summary information of the device. 

<Sysname> summary 

Select menu option:             Summary 

IP Method:                      DHCP 

IP address:                     10.153.96.86 

Subnet mask:                    255.255.255.0 

Default gateway:                0.0.0.0 

 

Current boot app is: flash:/2900_release.bin 

Next main boot app is: NULL 

Next backup boot app is: NULL 

 

3Com Corporation 

3Com Baseline Switch 2928-PWR Plus Software Version 5.20 ESS 1101