3com 2928 User Guide
1-8
Table 1-4
RADIUS server configuration
Item
Description
Server Type
Specify the type of the server to be configured, which can be
Authentication Server and Accounting Sever.
Primary Server IP
Specify the IP address of the primary server.
If no primary server is specified, the text box displays 0.0.0.0.
To remove the previously configured primary server, enter 0.0.0.0 in the
If no primary server is specified, the text box displays 0.0.0.0.
To remove the previously configured primary server, enter 0.0.0.0 in the
text box.
The specified IP address of the primary server cannot be the same as
The specified IP address of the primary server cannot be the same as
that of the secondary server.
Primary Server UDP Port
Specify the UDP port of the primary server.
If the IP address of the primary server is not specified or the specified IP
If the IP address of the primary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or
1813 for accounting.
Primary Server Status
Set the status of the primary server, including:
z
active: The server is working normally.
z
blocked: The server is down.
If the IP address of the primary server is not specified or the specified IP
address is to be removed, the status is blocked.
Secondary Server IP
Specify the IP address of the secondary server.
If no secondary server is specified, the text box displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in
If no secondary server is specified, the text box displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in
the text box.
The specified IP address of the secondary server cannot be the same as
The specified IP address of the secondary server cannot be the same as
that of the primary server.
Secondary Server UDP
Port
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified
If the IP address of the secondary server is not specified or the specified
IP address is to be removed, the port number is 1812 for authentication
or 1813 for accounting.
Secondary Server Status
Status of the secondary server, including:
z
active: The server is working normally.
z
blocked: The server is down.
If the IP address of the secondary server is not specified or the specified
IP address is to be removed, the status is blocked.
Configuring RADIUS Parameters
From the navigation tree, select Authentication > RADIUS and then select the RADIUS Setup tab to
enter the RADIUS parameter configuration page, as shown in
enter the RADIUS parameter configuration page, as shown in