3com 3c1670500a Installation Guide
OfficeConnect
®
Gigabit Switch 5
(3C1670500A)
Gigabit Switch 8
(3C1670800A)
Gigabit Switch 16
(3C1671600)
ABOUT YOUR SWITCH
1
2
3
OfficeConnect Gigabit Switch 8
3C1670800A
On = Full
Port Status
Blue = 1000M Green = 100M Yellow = 10M Flash = Activity
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Duplex
4
5
6
8
1
OK
10-30VDC
1A MAX
WARNING: RJ-45 ports.
These are shielded RJ-45 data sockets. They cannot be
used as standard traditional telephone sockets, or to
connect the unit to a traditional PBX or public telephone
network. Only connect RJ-45 data connectors, network
telephony systems, or network telephones to these
sockets.
used as standard traditional telephone sockets, or to
connect the unit to a traditional PBX or public telephone
network. Only connect RJ-45 data connectors, network
telephony systems, or network telephones to these
sockets.
Either shielded or unshielded data cables with shielded or
unshielded jacks can be connected to these data sockets.
unshielded jacks can be connected to these data sockets.
VORSICHT: RJ-45-Portes.
Diese Portes sind geschützte Datensteckdosen. Sie dürfen
weder wie normale traditionelle Telefonsteckdosen noch
für die Verbindung der Einheit mit einem traditionellenm
privatenm oder öffentlichenm Telefonnetzwerk gebraucht
werden. Nur RJ-45- Datenansclußhlüsse,
Telefonnetzsysteme oder Netztelefone an diese
Steckdosen anschließen.
weder wie normale traditionelle Telefonsteckdosen noch
für die Verbindung der Einheit mit einem traditionellenm
privatenm oder öffentlichenm Telefonnetzwerk gebraucht
werden. Nur RJ-45- Datenansclußhlüsse,
Telefonnetzsysteme oder Netztelefone an diese
Steckdosen anschließen.
Entweder geschützte oder ungeschützte Buchsen dürfen
an diese Datensteckdosen angeschlossen werden.
an diese Datensteckdosen angeschlossen werden.
AVERTISSEMENT : Prises RJ-45 blindées.
Ces prises ne peuvent servir comme prises téléphone
standard et ne permettent pas la connexion de l'appareil
à un système PBX ni à un réseau téléphonique public. N'y
branchez que des prises RJ-45 mâles adaptées, ou des
systèmes de réseaux téléphoniques. Il est possible d'y
brancher des câbles blindés ou non comportant des prises
de type Jack (blindées ou non).
standard et ne permettent pas la connexion de l'appareil
à un système PBX ni à un réseau téléphonique public. N'y
branchez que des prises RJ-45 mâles adaptées, ou des
systèmes de réseaux téléphoniques. Il est possible d'y
brancher des câbles blindés ou non comportant des prises
de type Jack (blindées ou non).
1 Power LED
Green
Indicates that the Switch is powered on. If the LED is
off, but the Power Adapter OK LED is lit, there may be
a problem with the Switch’s internal power supply.
Refer to Problem Solving.
off, but the Power Adapter OK LED is lit, there may be
a problem with the Switch’s internal power supply.
Refer to Problem Solving.
2 Five/Eight/Sixteen Port Status LEDs
Blue (1000 Mbps link) / Green (100 Mbps link) /
Yellow (10Mbps link)
Yellow (10Mbps link)
If the LED is on, the link between the port and the next
piece of equipment is OK. If the LED is flashing, the
link is OK and data is being transmitted or received. If
the LED is off, nothing is connected or the connected
device is turned off, or there is a problem with the
connection (refer to the Problem Solving section).
piece of equipment is OK. If the LED is flashing, the
link is OK and data is being transmitted or received. If
the LED is off, nothing is connected or the connected
device is turned off, or there is a problem with the
connection (refer to the Problem Solving section).
3 Duplex LEDs
Yellow (10/100/1000 Mbps, full duplex) /
Off (10/100 Mbps, half duplex)
Off (10/100 Mbps, half duplex)
4 Power Adapter Socket
Only use the power adapter that is supplied with the
Switch.
Switch.
5 Power Adapter OK LED
Green
Indicates that the power adapter is supplying power to
the Switch. If the LED is off, there may be a problem
with the power adapter or adapter cable (refer to
Problem Solving).
the Switch. If the LED is off, there may be a problem
with the power adapter or adapter cable (refer to
Problem Solving).
6 10BASE-T/100BASE-TX/1000BASE-T Ports
Use suitable TP cable with RJ-45 connectors. You can
connect your Switch to a workstation, or any other
piece of equipment that has 10BASE-T/100BASE-TX/
1000BASE-T connectivity.
connect your Switch to a workstation, or any other
piece of equipment that has 10BASE-T/100BASE-TX/
1000BASE-T connectivity.
Each port is capable of autosensing for 10 Mbps,
100 Mbps or 1000 Mbps operation.
100 Mbps or 1000 Mbps operation.
All ports have an automatic MDI/MDIX feature, which
means either straight-through or crossover cable can
be used to connect to any port.
means either straight-through or crossover cable can
be used to connect to any port.
OfficeConnect Gigabit Switch - Front
OfficeConnect Gigabit Switch - Rear
Installation Guide
About This Guide:
Thank you for purchasing the OfficeConnect Gigabit Switch. This high
quality, Gigabit Ethernet Switch is an easy, efficient way of creating a
network or expanding an existing network. The Switch’s Gigabit ports
provide support for bandwidth intensive applications, and allow high-
speed connections to servers, and to the rest of the network. An example
configuration is shown in Figure 1.
quality, Gigabit Ethernet Switch is an easy, efficient way of creating a
network or expanding an existing network. The Switch’s Gigabit ports
provide support for bandwidth intensive applications, and allow high-
speed connections to servers, and to the rest of the network. An example
configuration is shown in Figure 1.
The Switch is compact and attractively designed for desktop use. It can be
stacked with other units in the OfficeConnect family, which include
Cable/DSL gateways, wireless devices, Fast Ethernet and Gigabit Ethernet
switches. The OfficeConnect family is a fully integrated system, enabling
you to share computer resources, and take advantage of new technologies
as your network grows.
stacked with other units in the OfficeConnect family, which include
Cable/DSL gateways, wireless devices, Fast Ethernet and Gigabit Ethernet
switches. The OfficeConnect family is a fully integrated system, enabling
you to share computer resources, and take advantage of new technologies
as your network grows.
Your Package Contains:
• OfficeConnect Switch
• Power adapter for use with the Switch
• Stacking clip
• Four rubber feet
• This Installation Guide
• Support and Safety Information sheet
• Warranty flyer
• Power adapter for use with the Switch
• Stacking clip
• Four rubber feet
• This Installation Guide
• Support and Safety Information sheet
• Warranty flyer
About This Guide
This guide will use the term Switch when referring to the OfficeConnect
Gigabit Switch.
Gigabit Switch.
INTRODUCTION
CONFIGURATION
Dimensions and Operating Conditions
* Refer to Regulatory Notices in the Support and Safety Information sheet.
†
Category 5 (or better) screened cables must be used to ensure compliance with the Class B
requirements of the above standards. The use of unscreened cables complies with the Class A
requirements.
requirements of the above standards. The use of unscreened cables complies with the Class A
requirements.
Gigabit Switch 5
6VA, 20.8 BTU/hr
power requirement
6VA, 20.8 BTU/hr
power requirement
Gigabit Switch 8
8VA, 27.7 BTU/hr
power requirement
8VA, 27.7 BTU/hr
power requirement
Gigabit Switch 16
22.5VA, 77.9 BTU/hr
power requirement
22.5VA, 77.9 BTU/hr
power requirement
0 to 40ºC
(32 to 105ºF)
operating
temperature
(32 to 105ºF)
operating
temperature
0 to 95%
(non-condensing)
humidity
(non-condensing)
humidity
Weight:
Gigabit Switch 5: 1.0 Kg (2.2 lb)
Gigabit Switch 8: 1.0 Kg (2.2 lb)
Gigabit Switch 5: 1.0 Kg (2.2 lb)
Gigabit Switch 8: 1.0 Kg (2.2 lb)
Weight:
Gigabit Switch 16: 1.5 Kg (3.3lbs)
Gigabit Switch 16: 1.5 Kg (3.3lbs)
Depth:
185.4 mm (7.3 in.)
185.4 mm (7.3 in.)
Height:
54.6 mm (2.1 in.)
Width:
228 mm (9.12 in.)
Depth:
135.4 mm (5.33 in.)
135.4 mm (5.33 in.)
Height:
35.35 mm
(1.36 in.)
Width:
225 mm (8.08 in.)
On
= Fu
ll
Por
t St
atu
s
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Dup
lex
Por
t Sta
tus
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Dup
lex
On
= Fu
ll
1
2
3
4
5
6
7
8
9
1 0
1
1
1 2
1 3
1
4
1 5
1 6
DIMENSIONS AND STANDARDS
Standards
Functional:
ISO 8802/3, IEEE 802.3, 802.3u
Safety:
UL 60950-1, EN 60950-1, CSA 22.2 #60950-1, IEC60950-1
EMC
†
:
EN 55022 Class B, EN 55024, FCC Part 15 Class B*
ICES-003 Class B
ICES-003 Class B
Environmental: EN 60068 (IEC 68)
OfficeConnect Switch 8
with Gigabit Uplink
OfficeConnect
Gigabit Switch
Server
Workstation requiring
High Bandwidth Connection
10/100 Mbps Connections
1000 Mbps Connections
Po
rt S
tat
us
Blu
e =
10
00
M
Gr
ee
n =
10
0M
Y
ell
ow
=
10
M
Fl
ash
=
Ac
tiv
ity
On
=
Fu
ll
G b
E
1
2
3
4
5
6
7
8
G b
E
1
2
3
4
5
6
7
8
Off
iceConnect
Switch 8 with Gig
abit Uplink
3C1
670
108
Dup
lex
Por
t Sta
tus
Blue
= 100
0M G
reen
= 10
0M
Yello
w = 1
0M Fla
sh =
Activ
ity
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Figure 1 Network showing sample configuration with Gigabit Switch.
3Com Corporation, Corporate Headquarters, 350 Campus Drive, Marlborough, MA 01752-3064
Copyright © 2005 3Com Corporation. All rights reserved. 3Com, the 3Com logo, and
OfficeConnect are registered trademarks of 3Com Corporation.
OfficeConnect are registered trademarks of 3Com Corporation.
Microsoft, MS-DOS and Windows are registered trademarks of Micorsoft Corporation.
All other company and product names may be trademarks of their respective companies.
Part No: DIA1670-5AAA04 Published: May 2005
DIA1670-5AAA04.qxd 23/5/05 12:15 pm Page 1