3com S7906E Installation Instruction

 

1-12 

Enter IPv6 address family view 

ipv6-family 

— 

Enable BGP route refresh for a 
peer/peer group 

peer { group-name | 
ipv6-address } 
capability-advertise 
route-refresh 

Optional 

Enabled by default 

If this feature is not enabled, 
you need to configure this 
command.  

Enable the non-standard ORF 
capability for a BGP peer/peer 
group 

peer { group-name | 
ipv6-address } 
capability-advertise orf 
non-standard 

Optional 

By default, standard BGP ORF 
capability defined in RFC 5291 
and RFC 5292 is supported. 

If this feature is not enabled, 
you need to configure this 
command. 

Enter BGP IPv6 multicast 
address family view 

— 

Enable the ORF IP prefix 
negotiation capability for a BGP 
peer/peer group 

peer { group-name | 
ipv6-address } 
capability-advertise orf 
ip-prefix { both | receive | 
send } 

Required 

Not supported by default 

 

Table 1-1 Description of the both, send, and receive parameters and the negotiation result 

send 

The ORF sending capability is enabled locally 
and the ORF receiving capability is enabled on 
the peer. 

receive 

The ORF receiving capability is enabled 
locally and the ORF sending capability is 
enabled on the peer. 

both 

Both the ORF sending and receiving 
capabilities are enabled locally and on the 
peer, respectively. 

 

Configuring the Maximum Number of Equal-Cost Routes for Load-Balancing 

Follow these steps to configure the maximum number of equal-cost routes for load-balancing: 

To do… 

Use the command… 

Remarks 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter IPv6 MBGP address 
family view 

ipv6-family multicast 

— 

Configure the maximum 
number of equal-cost routes for 
load balancing 

balance number 

Required 

By default, load balancing is 
disabled.