3com S7906E Reference Guide
1-26
<Sysname> display bgp multicast routing-table flap-info
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path/Origin
*> 55.0.0.0 12.1.1.1 2 00:00:16 100?
*d 77.0.0.0 12.1.1.1 5 00:34:02 00:27:08 100?
Table 1-11 display bgp multicast routing-table flap-info command output description
Field
Description
From
Source IP address of the route
Flaps
Number of routing flaps
Duration
Route flap duration
Reuse
Reuse time of the route
Refer to
for description on the other fields above.
display bgp multicast routing-table peer
Syntax
display bgp multicast routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ]
View
Any view
Default Level
2: Monitor level
Parameters
ip-address: IP address of an IPv4 MBGP peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
statistic: Displays route statistics.
Description
Use the display bgp multicast routing-table peer command to display IPv4 MBGP routing
information advertised to or received from the specified IPv4 MBGP peer.