3com S7906E Reference Guide
1-21
Parameters
None
Description
Use the display ipv6 routing-table verbose command to display detailed information about all active
and inactive routes, including the statistics of the entire routing table and information for each route.
Examples
# Display detailed information about all active and inactive routes.
<Sysname> display ipv6 routing-table verbose
Routing Table :
Destinations : 1 Routes : 1
Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
RelayNextHop : :: Tag : 0H
Neighbour : :: ProcessID : 0
Interface : InLoopBack0 Protocol : Direct
State : Active NoAdv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 22161sec
Table 1-8 display ipv6 routing-table verbose command output description
Field
Description
Destination
Destination IPv6 address
PrefixLength Prefix
length of the address
Nexthop Next
hop
Preference Route
priority
RelayNextHop
Recursive next hop
Tag
Tag of the route
Neighbour Neighbor
address
ProcessID Process
ID
Interface Outbound
interface
Protocol Routing
protocol
State
State of the route, Active, Inactive, Adv (advertised), or NoAdv (not advertised)
Cost
Cost of the route
Tunnel ID
Tunnel ID
Label Label
Age
Time that has elapsed since the route was generated