3com 3c16477 User Manual

The SuperStack 3 Baseline 8 Port Gigabit Switch has been 
designed to the following standards:

This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to part 15 of the FCC 
rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in 
a commercial environment. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause harmful 
interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful 
interference to radio communications, in which case the user will 
be required to correct the interference at their own expense.

If this equipment does cause interference to radio or television 
reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

„

Reorient the receiving antenna

„

Relocate the equipment in relation to the receiver.

„

Move the equipment away from the receiver.

„

Plug the equipment into a different outlet so that equipment 
and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced 
radio/television technician for additional suggestions. The user 
may find the following booklet prepared by the Federal 
Communications Commission helpful:

This booklet is available from the U.S. Government Printing 
Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

In order to meet FCC emissions limits, this equipment must be 
used only with cables which comply with IEEE 802.3.

This product complies with the European Low Voltage Directive 
73/23/EEC and EMC Directive 89/336/EEC as amended by 
European Directive 93/68/EEC/.

This Class A digital apparatus meets all requirements of the 
Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les 
exigences du Règlement sur le matériel brouilleur du Canada.

ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast 
Ethernet), IEEE 802.3ab (Gigabit Ethernet), IEEE 802.1D 
(Bridging)

UL 60950, EN 60950, CSA 22.2 #60950, IEC 60950

EN 55022 Class A, FCC Part 15 Subpart B Class A, 
ICES-003 Class A, VCCI Class A, AS/NZS 3548 Class A, 
CNS 13438 Class A

EN 55024

0–40 °C (32–104 °F)

10–95% (non-condensing)

440 mm (17.3 in.)

173 mm (6.8 in.)

43.6 mm (1.7 in.) or 1U

3 kg (6.6 lb)

Free standing, or 19-inch rack mounted using the 
mounting kit supplied

IEC 320

47 to 63 Hz

100–240 VAC

0.4 A at 115 V, 0.2 A at 230 V

28 W

95.6 BTU/hr