Manualsbrain.com
  1. Manuals
  2. Brands
  3. Pico Macom
  4. tsms-2150-4
  5. User Guide

Pico Macom tsms-2150-4 User Guide

Download
Page of 4
TSMS2150-4A
Installation/Specifications
3
Rev. 03/04
Ph: 800-421-6511
www.picomacom.com
3x4 Satellite IF Multiswitch
Specifications
Input Frequency:
LNB 1 and 2:
950-2150 MHz
TV Antenna:
40-860 MHz
Output Frequency:
Satellite Receiver
950-2150 MHz
Television Antenna
40-860 MHz
Insertion Loss:
950-2150 MHz:
5 dB max.
40-860 MHz:
0 dB max.
Isolation:
Input-Input
>28 dB
Output-Output
>25 dB
Cross Polarization:
950-1750 MHz:
>25 dB
1750-2150 MHz:
>20 dB
DC Passing Capacity:
Satellite:
500 mA
TV Antenna:
none
Dimensions:
4.34˝(L) x 3.6˝(W) x 0.83˝(H)
Weight
:
0.55 lbs.
Connectors:
“F” type
Channel Loading Specifications
Ordering Information
TSMS2150-4A
3x4 Multiswitch
Max. Input 
Level
Total # of 
Channels
Output
Level
7
30 dBmV
30 dBmV
24
15 dBmV
15 dBmV
A.
Install the switch as shown.
B.
All of the RF connections must use 75 ohm coaxial cables.
C.
Connect each output of the multiswitch to the input of a TSDM-2150
TV/Satellite Splitter.
D.
Connect the TV output port of the TSDM-2150 to the UHF/VHF RF 
input of the TV.
E.
Connect the SAT output port of the TSDM-2150 to the RF input port
of a satellite receiver.
F.
Each of the satellite receivers can select programs in either right hand
or left hand circular polarity. To select a RHCP a 13/14 DC switching
voltage is used and to select a LHCP a 17/18 DC switching voltage
is used.
Installation
TSMS2150-4A Manual.qxd  4/1/04  3:37 PM  Page 3