4XEM 4X-FD7132 Installation Instruction

EN - 10

Based on the live image retrieved from the camera, adjust the camera lens by doing the 
following:

Audio Out

Mic. In

Ext.

Int.

1 

2 

3 

4 

I/O

W

T

8

N

DO NOT over tighten the controllers. 
Doing so would damage the structure 
of camera lens.

To adjust the viewing angle

1.  Loosen the pan screw and then turn the lens module left and right. Upon completion, 

tighten the pan screw.

2.  Loosen the tilt screws on both side of the camera and then turn the lens module up and 

down. Upon completion, tighten the tilt screws.

3.  Loosen the image adjustment screw and then turn the lens to adjust the image 

orientation. Upon completion, tighten the image adjustment screw.

To adjust the zoom factor and focus range

1.  Loosen the zoom controller and then adjust zoom factor by moving the controller left and 

right. Upon completion, tighten the zoom controller.

2.  Loosen the focus controller and then adjust focus range by moving the controller left and 

right. Upon completion, tighten the focus controller.

2

3

I/O

Audio Out

Mic. In

Ext.

Int.

1 

2 

3 

4 

I/O

Audio Out

Mic. In

Ext.

Int.

1 

2 

3 

4 

Audio Out

Mic. In

Ext.

Int.

1 

2 

3 

4 

I/O

1

Loosen

Tighten

Loosen

Tighten

Loosen

Tighten

Loosen

Tighten

Rotate the screw
Turn the lens