Insignia ns-cnv20 Information Guide

 

 

• Touch 

the 

Phone button on the home screen. A message displays “Your phone is not set up. Set up now?” Touch Yes. 

Bluetooth settings screen opens. 

•  Touch the green arrow on the right. The Bluetooth enable/disable screen opens. 

• Touch 

enable, then touch the back arrow at the bottom of the screen. 

• Touch 

PIN Number to display the keypad, then type your phone’s PIN number.  Please refer to the manual that came 

with your cellular phone.  The default PIN number for many Bluetooth devices is 0000. 

• Touch 

Save after you enter the number.  The screen returns to the Bluetooth management screen.  If you have not set 

your phone to pair with a Bluetooth device, the screen indicates “No phone connected.” 

•  Set your phone to scan for a Bluetooth device.  It should indicate that it has found a Bluetooth device and the GPS 

device indicates that a phone is paired. 

• Touch 

OK to close this message and return to the Bluetooth management screen.  The screen displays the name of the 

phone you paired. 

•  Touch any button at the bottom to exit the screen and continue using the device. 

 
How do I answer a call with my GPS when my phone is connected via Bluetooth? 

•  When a call is received, an incoming call message displays showing the phone number. 

• Touch 

the 

Phone alert which displays the incoming call information, then touch answer or ignore. 

• Touch 

the 

Phone button on the home screen. The dial keypad opens. 

•  Enter the phone number, then touch Call. Your phone dials the number. 

•  Updates are available in Best Buy stores at the Geek Squad bench.  These updates will be available up to 4 times per 

year. 

•  Each quarter, a notice will be sent to your GPS device letting you know when the updates are available. 

•  Updates will be free for the first year. Annual subscriptions of $99 will be available after the first year is up. 

•  The annual subscription includes updated maps, Google search, real time traffic, etc. 

•  Set the bottom edge of the GPS onto the mount cradle. 

•  Press down on the top edge of the cradle and pivot the top of the GPS into the cradle. 

•  Push the mount cradle and GPS assembly into the mounting bracket. 

•  Lift the suction fastener. 

•  Place the assembly on the desired location, windshield or dash, then press the fastener down to secure it to the 

surface. 

•  If you are using this GPS unit in either California or Minnesota, it is against the law to place the suction mount on car 

windshields, side, or rear windows as it can obstruct the driver’s clear view. 

•  The battery charge indicator is located in the upper left corner of the screen.   

o

  If the battery is fully charged, three bars will be located inside the battery icon. 

•  A fully charged battery will last approximately 2 hours.