Insignia is-hc040917 User Manual

Operating Your Receiver

Remote Control Function

1.I

selector

3. Number 1-8 button

Press these button to select preset tuning channel.

4. Tuning scan button

6.TEST

Outputs the test tone to adjust the speaker levels.

7. S

8.DTS & DTS ES mode selection button

9.DTS Neo:6 Cinema/Music mode selection button

10. POWER

11.A/B/C/D

nput

Selects the input source you want to listen to or watch.

FM/AM band switches button

Press the button to switch the reception band between FM

and AM.

Press the SCAN+ side to tune in to a higher Frequency.

Press the SCAN- side to tune in to a lower frequency. Press

and keep two second minutes, scan automatically.

Master volume

ET MAIN MENU button

Press these buttons to turn the unit into the SET MAIN

MENU mode.

Select an item of menu by using the or buttons. the

name item of menu will be displayed on the display, then

press the or buttons (or turn ADJUST knob on the panel)

to adjust or set it' parameter or range.

Note:

Input sources must be DTS or DTS ES

Press this button to set this in the standby mode.Press again

turn on the power of this unit.

Controls the output level of all audio channels.

-encoded.

Selects one of the 4 preset station groups (A to D), when

the unit is in tuner mode.

12.

13. MUTE

14. DSP mode selection button

15. Dolby Digital & Dolby Digital Surround EX mode

selection button

16. 2 channels stereo mode & 6 channels stereo

mode selection button

17. Dolby Pro logic II Movie/Music mode selection

button

18.

10min,20min,30min,40min, 50min,60min,

70min,80min,90min,100min,110min,120min.

Stores a station in the memory

6 DSP modes:

Mute the sound. Press again to restore the audio out to the

previous volume level.

Note:

SLEEP button

ets the sleep time:

Live Disco Jazz Classic Hall Rock.

Input sources must be Dolby digital or Dolby Digital Surround

-encoded.