Insignia ns-32l550a11 User Guide

32"/37"/42"/46" LCD, 120 Hz 1080p

www.insigniaproducts.com

1 Make sure that your TV’s power cord is 

unplugged and the VCR is turned off.

2 Connect the video connector on a composite 

cable (not included) to the AV IN VIDEO jack on 
the back of your TV and the VIDEO OUT jack on 
the VCR.

3 Connect the left and right audio connectors on 

the composite cable to the AV IN L/R audio 
jacks on the back of your TV and to the AUDIO 
OUT jacks on the VCR.

4 Turn on your TV, then turn on the VCR.

5 Press INPUT to open the Source List.

6 Press  

or  

to 

highlight 

AV, then press 

OK/ENTER.

7 Insert a videotape into the VCR, then press the 

play button.

1 Make sure that your TV’s power cord is 

unplugged and the computer is turned off.

2 Connect a VGA cable (not included) to the VGA 

jack on the back of your TV and to the VGA jack 
on the computer.

3 Connect an audio cable to the 

PC/DVI AUDIO IN jack on the back of your TV 
and to the AUDIO OUT jack on the computer.

4 Turn on your TV, then turn on the computer.

5 Press INPUT to open the Source List.

6 Press   or   to highlight VGA, then press 

OK/ENTER.

The AV IN VIDEO jack and the AV IN S-VIDEO jack 
share the same audio jacks. You cannot connect both 
types of devices at the same time.

Back of TV

VCR

Cables are often color-coded to 
match color-coded jacks. 
Connect yellow to yellow, red to 
red, and white to white.

When the computer enters Standby mode, your TV 
turns off. If your TV does not turn on when you 
“wake” your computer, press 

 

(power) on your TV 

or remote control.
For HDMI-DVI input from PC, the TV will enter 
Standby mode after one minute if no signal is 
detected.

Back of TV

NS-32_37_42_46_550A11_10-0465_MAN_V4_English.book  Page 17  Friday, April 9, 2010  2:47 PM