Insignia ns-lcd26 User Guide

Page of 100
21
Insignia NS-LCD26A LCD TV
www.insignia-products.com
Maintaining
About temperature
Do not use the television in hot and cold 
rooms (locations).
When the television is used in rooms 
(locations) with low temperature, the picture 
may leave trails or appear slightly delayed. 
This is not a malfunction and the television 
will recover when the temperature returns to 
normal.
Do not leave the television in a hot or cold 
location. Also, do not leave the television in a 
location exposed to direct sunlight or near a 
heater, as this may cause the cabinet to 
deform and the screen to malfunction.
Storage temperature: 32 to 122°F (0 to 50°C)
Working temperature: 41 to 104°F (5 to 40°C)
About After-Image
The extended use of a fixed image program can 
cause a permanent after-image (also known as 
burn-in) on the screen. This background image 
is viewable on normal programs in the form of a 
stationary fixed image. This irreversible screen 
damage can be limited by doing the following:
Reduce the brightness/contrast setting to a 
minimum viewing level.
Do not display the fixed image for extended 
periods of time.
Turn the power to the television off when not 
in actual use.
Cleaning and Maintenance
To clean this television, wipe with a soft, dry 
cloth. If the surfaces are extremely dirty, use a 
soft cloth dipped in a soap and water solution or 
a weak detergent solution.
Use eyeglass cleaner to remove stubborn dirt 
from the screen.
Never use alcohol, paint thinner, or benzine 
to clean this television.
Before using a chemically treated cloth, read 
the instructions that came with the cloth 
carefully.
Troubleshooting
If, after reading these operating instructions, you 
have additional questions related to the use of 
your television, call the service center.
Before calling service, check the symptoms and 
follow the suggested solutions.
Caution
Do not allow a still picture to be displayed for an 
extended period, as this can cause a 
permanent after-image to remain on the 
screen.
Examples of still pictures include logos, video 
games, computer images, teletext, and images 
displayed in 4:3 mode.
The permanent after-image on the screen 
resulting from fixed image use is not an 
operating defect and as such is not covered by 
the warranty.
This television is not designed to display fixed 
images for extended periods of time.
Category Problem
Possible Solution
Remote 
control
Remote control 
does not 
operate
• The batteries may be weak. 
Replace the batteries.
• Check the orientation of the 
batteries.
• Make sure the power cord is 
plugged in.
Remote control 
does not 
operate other 
brand 
equipment
• If you replaced the batteries 
to the remote recently, the 
code numbers for the video 
equipment may need to be 
reset.
• There may be more than one 
code for the equipment that 
you are attempting to 
operate.
• There is a possibility that this 
equipment can only be 
operated by its original 
remote control.
Video and 
Audio
No picture 
(screen is not 
lit)
No sound
• Make sure that the power 
cord is plugged in.
• Press POWER on the 
television or on the remote 
control.
• Try another channel. It could 
be station trouble.
Dark, poor, or 
no picture 
(screen is lit)
Good sound
• Select a different picture 
mode.
• Adjust the brightness in the 
video setting.
• Check the antenna/cable 
connections.
No color/dark 
picture/color Is 
not correct
• Adjust the color saturation in 
the video setting.
Only snow and 
noise appear on 
the screen
• Check the antenna/cable 
connections.
• Try another channel. It could 
be station trouble.
Dotted lines or 
stripes
• Adjust the antenna.
• Move the television away 
from noise sources such as 
cars, neon signs, or hair 
dryers.
Double images
• Use a highly directional 
outdoor antenna or a cable 
television provider.
Black box on 
screen
• You have selected a text 
option and no text is 
available. Turn off the Close 
Caption feature or select a 
different option.
Good picture, 
no sound
• The sound may be muted. 
Press MUTE again to cancel.
• Make sure that the stereo 
mode is set to stereo or 
mono.
Audio noise
• Communication problems 
may occur if infrared 
communication equipment 
(such as infrared cordless 
headphones) is used near 
the television. Move the 
infrared communication 
equipment away from the 
television until the noise is 
eliminated.