Manualsbrain.com
  1. Manuals
  2. Brands
  3. Clarion
  4. CX609
  5. User Guide

Clarion CX609 User Guide

Download
Page of 38
Operations Common to Each Mode
English
22
CX609
 
5-1. Press and hold the [
] button (2 sec.)
The entered Personal Code will be set, and 
it will return to the previous screen.
Note:
• Write down your Personal Code in case you 
forget it.
•
Erasing the Personal Code
2-1. Select “CODE”.
3-1. Press the [
] button.
The ERASE PERSONAL CODE screen 
appears.
4-1. Enter the Personal Code currently.
5-1. Press and hold the [
] button (2 sec.) or 
longer.
Enter a Personal Code mode is cancelled.
•
When the ENTER PERSONAL 
CODE screen appears
The ENTER PERSONAL CODE screen will be 
displayed when turning the ACC power on after 
performing the following operations:
• The car battery was replaced.
• The backup power was cut off.
• The [RESET] button was pressed.
Note:
• If you have lost your Personal Code, please 
contact Clarion customer service.
1. Enter your Personal Code currently set.
2. When the correct Personal Code is entered, 
the unit will restart from the initial startup 
screen.
Notes:
• When you enter a wrong Personal Code, the 
message “LOCK - - - -” is displayed and the 
Personal Code entry is prohibited for a while. 
This prohibited time is changed according to the 
number of times of wrong code entry as follows:
• 1 to 6 times: 15 seconds
• 7 times or more: 15 minutes
Saving XM source name
This function allows the XM source name to be 
saved in the display, whether the mini tuner is 
connected to the unit or not.
∗ The factory default setting is “ON”.
1. Select “XM SRC”.
2. Press the [
w] or [z] button to select 
“ON”
 or 
“
OFF
”.
• OFF:
Only when the mini tuner is connected to 
this unit, the XM source name will appear in 
the display when you switch the operation 
mode.
• ON:
Even if the mini tuner is connected to this 
unit or not, the XM source name will appear 
in the display when you switch the 
operation mode.
● Turning the screen saver function on 
or off
This unit is provided with the screen saver 
function which allows you to show various kinds 
of patterns and characters in the operation 
status indication area of the display in a random 
order. You can turn on or off this function. If the 
button operation is performed with the screen 
saver function on, the operation display 
corresponding to the button operation is shown 
for about 30 seconds and the display returns to 
the screen saver display.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Press the [
w] or [z] button to select the 
setting.
Each time you press the [
w] or [z] button, 
the setting changes in the following order:
“MESSAGE” 
↔ “OFF” ↔ “ON”
● Entering message information
Message up to 30 characters long can be stored 
in memory and displayed as a type of screen 
saver setting.
∗ The factory default setting is “WELCOME TO 
CLARION”.
2-1. Select “MESSAGE INPUT”.
3-1. Press the [
] button.
3-2. Press and hold the [BND] button (1 sec.) to 
clear the old message.
3-3. Press the [
x] or [v] button to move the 
cursor.
3-4. Press the [BND] button to select a 
character type. Each time you press the 
[BND] button, the character type changes 
in the following order:
Capital letters 
➜ Numbers ➜ Symbols ➜ 
Capital letters…
3-5. Press the [
w] or [z] button to select the 
desired character.
CX609_ENG.book  Page 22  Tuesday, January 13, 2009  10:52 AM