Clarion cz300 User Guide

14

English

HD Radio technology allows CD-quality 

digital broadcasting of your local AM and 

FM radio stations. HD Radio broadcasts 

can include multiple channels on the same 

frequency, which is called multicasting. With 

multicasting, you can receive up to eight 

additional multicast channels: HD1–HD8. 

With an HD Radio tuner connected, you 

will receive HD Radio digital broadcasts 

automatically when tuned to a station that 

offers HD Radio technology. 

Press the [

SRC] button on the front panel 

or remote control to switch to the RADIO 

source, and HD icom will light when a 

THD300 is connected.

Press the [

BAND] button to change between 

three FM and one AM bands. Each band 

stores up to six preset stations.

Press and hold the [

] or [

] button to 

seek the next/previous station automatically. 

Press the [ 

 ] or [ 

 ]  button to move 

the radio frequency number up or down one 

step.

To tune to an HD Radio multicast channel, 

tune to the main signal and then press the 

[

MENU] button on the front panel. PTY is 

displayed. Select PTY or SUB CH by rotating 

the [

VOLUME] knob and press to confirm.

•  Select PTY type from the category list by 

rotating the [

VOLUME] knob and press it.

•  Select SUB CH by rotating the [

VOLUME] 

knob and press it.

•  Multi channel is available when a digital 

signal is detected, the DIGITAL icon 

will light. If the digital signal becomes 

unavailable, the unit will revert to Analog 

reception.

Up to six stations on each band can be 

stored as presets, which can then be 

instantly recalled by pressing the associated 

preset button. To store a station, turn the 

radio on and select the desired band and 

station. Press and hold the desired preset 

button (numbered one through six on the 

face of the radio or remote control) for more 

than two seconds. When stored, the preset 

number will appear in the display. The 

station is now stored and can be recalled by 

pressing the corresponding preset button. 

Repeat for the remaining five presets on the 

current band and for presets on the other 

four bands.

Press the [

PS/AS] button to scan and play all 

preset stations for 10 seconds each. Press 

the [

PS/AS] button again to stop scanning 

and play the current station.

Press and hold the [

PS/AS] button to select 

six strong stations and store them in the 

current band using the auto store function. 

After entering the stations into memory, the 

unit will automatically stop at each station 

for five seconds, allowing you to preview 

each selection. When using the auto store 

function, the new stations replace any 

stations already stored in preset memory.

You can stop the auto store function at any 

time by pressing the [

PS/AS] button again.