Xanté 8200 Installation Instruction

Introduction

This chapter covers setting up your new Accel-a-Writer 8200 printer.
It includes finding the right location, unpacking the printer, installing
toner and paper, connecting the power cord, printing a start-up page,
and connecting to an interface.

Printer Location

Before unpacking your Accel-a-Writer 8200, you need to choose a
good location. This area should meet the following guidelines:

•

Be on a level, sturdy surface capable of supporting 60 lbs
(27.24 kg)

•

Have an area of approximately 25" x 49" (644 mm x
1250 mm) so there is sufficient clearance for operation
and maintenance

•

Maintain a temperature of 50˚ to 90.5˚ Fahrenheit (10˚ to
32.5˚ Celsius) without rapid changes

•

Maintain a relative humidity between 20% and 80%

•

Be away from direct sunlight, open flames, refrigerators,
water faucets, humidifiers, heaters, or similar equipment

•

Be away from strong vibrations or electromagnetic fields

•

Maintain proper host-printer distance for communication:
within 10 feet (3 m) for parallel; within 25 feet (7.5 m) for
serial; within 1000 feet (305 m) for LocalTalk

•

Be close to a grounded electrical outlet with the proper
voltage

Do not use ammonia-based cleaners on or around the
printer; they react chemically with the toner. Also, like most
laser printers and photocopiers, this one produces a small
amount of ozone, so choose a well ventilated area.