Xerox 4112 User Guide

Page of 364
Xerox 4112/4127 Copier/Printer System Administration Guide
6-7
6. Computer Operations
Port number
This service is configured to use port "80" by default. The port 
number can be changed in 
Properties
 > 
Protocol Settings
 > 
HTTP
. Valid ports are 1 - 65535.
If you change the port to a value other than "80," you must add ":" 
plus the port number to the IP address when typing the URL into 
your browser.
For example, if the port number is "8080," the URL is: 
http://
the IP address of the machine
:8080
OR
http://
the Internet address of the machine
:8080
You can verify the port number in Settings List > Maintenance
For information about the Setting List, refer to the section entitled 
“Print Report/List” in Chapter 10 of the User Guide.
NOTE: If communications are encrypted, you must specify an 
address that starts with "https" instead of "http" to access 
CentreWare Internet Services.
Starting CentreWare Internet Services
To use this service, perform the following procedure on your 
computer.
1.
Start up the computer and the browser.
2.
Enter the device IP address or Internet address in the browser 
address field and press the 
Enter
 key.
NOTE 1: If your network uses DNS (Domain Name System) 
and the host name of the machine is registered with the 
domain name server, you can access the device using a 
combination of the host name and the domain name as the 
"Internet address." For example, if the host name is "myhost," 
and the domain name is "mycompany.com," then the "Internet 
address "myhost.mycompany.com." When specifying a port 
number, add ":" and a port number to the end of the Internet 
address.
NOTE 2: If using the authorization feature on the machine, 
enter a UserID and Password into the User Name and 
Password fields. Ask the machine administrator for the 
UserID and Password.
NOTE 3: If communications are encrypted, you must specify 
an address that starts with "https" instead of "http" to access 
CentreWare Internet Services.