Xerox 4112 User Guide
Xerox 4112/4127 Copier/Printer System Administration Guide
8-120
8. Setups
Print Service Settings
In
Print Service Settings
, you select settings that relate to the
machine’s memory and miscellaneous features, including tray
substitution, paper type mismatch, printing a banner sheet, and
more.
When using CentreWare Internet Services, more detailed settings
are possible. For more details, refer to
are possible. For more details, refer to
The following settings are covered in this section:
•
•
Allocate Memory
•
Delete Form
•
Other Settings
Use the following procedure to access and change the various
Print Mode Settings
.
1.
From the
System Settings
screen, select
Print Service
Settings
and select the item to be set.
Allocate Memory
For each interface, you can select the memory capacity for the
receiving buffer (temporary storage for data sent from the
client). You can change the receiving buffer capacity depending
on the pattern of use and purpose. Increasing the receiving buffer
capacity may allow a client to be released sooner from an
interface.
KEY POINT:
If you change the memory capacity settings, the
memory is reset, and therefore data stored in all memory areas is
lost.
NOTE: It is not possible to assign more than the total memory.
When the power is turned on, if the settings exceed the available
memory capacity, they are automatically adjusted by the system.
When the power is turned on, if the settings exceed the available
memory capacity, they are automatically adjusted by the system.