Xerox 5750 Reference Guide

1.  Load sheets in the BYPASS Tray 

.

2.  Select Label/Heavy Weight Mode.
3.  Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus

preventing sheets from sticking together.

1.  Load only 25 sheets in the BYPASS Tray or 250 sheets in the HIGH CAPACITY FEEDER

.

2.  Select Heavy Weight Mode.
3.  Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus

preventing sheets from sticking together.

1.  Load sheets in Tray 2, 3 or 4

.

2.  Select Heavy Weight Mode.
3.  Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus

preventing sheets from sticking together.

1.  Load only 25 sheets in the MULTI SHEET INSERTER

.

2.  Select Label Mode.
3.  Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus

preventing sheets from sticking together.

1.  Load labels in Tray 3

.

2.  Select 151-220 gsm Mode.
3.  Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus

preventing sheets from sticking together.

** Refer to the product specific Recommended Materials List for proper paper handling instructions.

•

 

Fan sheets before loading.

•

 

Store unused material in plastic polybag.

•

 

When clearing a jam, carefully pull out the transfer drawer to avoid machine damage.

•

 

Insure no labels have pre-dispensed.

•

 

Limit toner saturation on electronic originals to a total of 240% saturation (60% for each color).

•

 

For 1 up label template, use AVERY 5165

•

 

For 30 up label template, use AVERY 5160