Xerox 2101 Release Note

For any additional job attributes that are not displayed in Command WorkStation, you can 
add those fields or attributes by right-clicking the Command WorkStation status bar and 
selecting the attribute from the pull-down menu. After you do this, those additional 
attributes appear in the jobs that have them.

Unsupported file formats (.jpeg, .gif, .html) appear in the file format list in 
WebDownloader. Do not download these file formats using WebDownloader. Although 
the Fiery EX2101 Printer Controller does not support these files directly, you can open the 
file in the application in which it was created and then print the file.

Contrary to statements in the user documentation, VPS and PPML are not supported.

The background does not print in PowerPoint. To work around this, select Color in the 
Microsoft portion of the printer driver.

For a duplex Microsoft Word job, if the job contains 8.5

x

11-LEF and 11

x

17 duplex, the 

11

x

17 sheets must be separated in one of two ways:

• Using Microsoft Word, insert an 8.5

x

11-LEF sheet in between the 11

x

17 sheets. 

• Using Mixed Media, for simplex 11

x

17, set the pages to duplex off.

For duplex 11

x

17, set the pages to duplex Top-Top.

If the job contains 8.5

x

11-LEF and 11

x

17 and is not a duplex job, you can use hole 

punch, staple, and Z-fold without making any additional changes.

If you select the Negative option and select settings other than the default settings for 
Booklet Front Cover Mode or Booklet Back Cover Mode, unexpected results may occur 
when printing an Acrobat 5.0 booklet job. For example, the next page of the cover may 
print white. To avoid this, if you print a booklet job with the Negative option using Acrobat 
5.0, make sure that the booklet cover modes are set to the default settings.

When you print a stapled job using the Windows 98 Postscript printer driver, the job may 
not staple in the location specified. For example, if you print an 8.5

x

11 LEF job and specify 

Upper Left for Staple Mode, the job is stapled upper right. If you print an 8.5

x

11 LEF job 

and specify Upper Right for Staple Mode, the job is stapled lower right. If this happens, use 
the PCL driver or use SEF.

Duplex jobs do not print properly when you print them from the PCL printer driver. For 
example, if you print an 8.5

x

11 SEF job and specify Top-Top for Duplex, the job is printed 

Top-Bottom. If you print an 8.5

x

11 SEF job and specify Top-Bottom for Duplex, the job is 

printed Top-Top. If this happens, use the PostScript driver or use LEF.