Xerox 5550 User Guide
Loading Paper
Phaser® 5550 Printer
4-20
5.
If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
that are shown. If you have changed the paper size or type, do the following:
a.
Select
Change setup
and then press the OK button.
b.
Select the paper type, and then press the OK button to save your selection.
6.
In the printer driver, select either the paper type or Tray 6
as the paper source.
Loading Paper in Tray 1 (MPT) for 2-Sided Printing
All standard paper sizes, except postcard, B6 JIS, and envelopes, and most custom paper sizes
can be used in Tray 1 (MPT) for 2-sided printing.
can be used in Tray 1 (MPT) for 2-sided printing.
1.
Lower Tray 1 (MPT).
Caution:
If you change the type or size of
paper in a tray, you must change the paper
type and size on the control panel to match
the paper that you loaded. If you fail to do
this, print-quality problems or jams can
occur, and the fuser can be damaged.
type and size on the control panel to match
the paper that you loaded. If you fail to do
this, print-quality problems or jams can
occur, and the fuser can be damaged.
5550-123
5550-262
D
B