Xerox 123 Reference Guide

Before using the machine, press the TEST button. If the GFI is working properly, the 
RESET button should pop up. If it does, press the RESET button.

NOTE: If the RESET button pops back up when you press it, or if power is not 
restored by this procedure, contact the Xerox Welcome Center.

The machine has energy saving features that significantly reduce power consumption 
during inactivity. The <Power Saver> button is located on the upper-right portion of the 
control panel, and lights up when the power saving feature is enabled. The power 
saving feature operates in the following two modes.

• Low Power Mode

• Sleep Mode

Low Power Mode
The machine automatically switches to the Low Power Mode after a certain period of 
time from the last copy, fax, scan, or print operation. In this mode, the touch screen is 
turned off, and the Power Saver light is on. The Low Power Mode is cancelled when 
the <Power Saver> button on the control panel is pressed, or a fax or print job is 
received by the machine. The factory default setting of 2 minutes is customer 
changeable within the range of 2 to 60 minutes.
For more information, refer to Auto Power Saver in the Setups chapter on User Guide.

RESET button

TEST button

<Power Saver>
light/button