Xerox 123 Reference Guide
Scan Options - Copy
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
51
Bound Originals
This feature allows you to copy facing pages of a bound document using the document
glass. The two pages will be copied onto two separate pages.
glass. The two pages will be copied onto two separate pages.
1.
Select [Bound Originals] on the
[Scan Options] screen.
[Scan Options] screen.
2.
Perform the necessary
operations.
operations.
3.
Select [Save].
NOTE: The facing pages of a bound document must be placed in a horizontal
orientation on the document glass.
orientation on the document glass.
Off
Disables the feature.
Disables the feature.
Left Page then Right
Copies both pages of an open book from left to right.
Copies both pages of an open book from left to right.
Right Page then Left
Copies both pages of an open book from right to left.
Copies both pages of an open book from right to left.
Top Page then Bottom
Copies both pages of an open book from top to bottom.
Copies both pages of an open book from top to bottom.
Both Pages
Copies both pages of an open book.
Copies both pages of an open book.
Left Page Only
Copies only the left-side page of an open book.
Copies only the left-side page of an open book.
Right Page Only
Copies only the right-side page of an open book.
Copies only the right-side page of an open book.
Top Page Only
Copies only the upper-side of an open book.
Copies only the upper-side of an open book.
Bottom Page Only
Copies only the lower-side of an open book.
Copies only the lower-side of an open book.
Center Erase
Erases printing of the central gutter area of the book that tends to be shadowed. Use
the scroll buttons to specify the area to be erased from the center of an open book
within the range of 0–50 mm (0.0–2.0 inches) in 1 mm or 0.1 inch increments.
Erases printing of the central gutter area of the book that tends to be shadowed. Use
the scroll buttons to specify the area to be erased from the center of an open book
within the range of 0–50 mm (0.0–2.0 inches) in 1 mm or 0.1 inch increments.