Xerox 123 Reference Guide

You can change the languages in the following two ways.
When changing the language for temporary use, press the <Language> button on the 
control panel, then select the required language.
NOTE: The changed language returns to the default language after rebooting the 
machine.

When changing the default language, enter the System Settings mode, select 
[Common Settings], then select [Screen Defaults]. In the [Screen Defaults] screen, 
select the required language as [Default Language]. For more information, refer to the 
Setups chapter in the User Guide.

The conventions used throughout this guide are described in the User Guide on the 
Documentation CD-ROM or on the website:www.office.xerox.com/support

The following additional sources of information are available for the machine.

• Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide

• Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System 

Administration Guide

• The On-line Help systems (Print Drivers and CentreWare Utilities)

• The CentreWare Utilities Documentation (HTML)
NOTE: Please note that the screens shown in this Guide apply to a fully configured 
machine and therefore may not exactly represent the configuration being used.

This section describes the cautions and limitations to observe when using this machine.

• When moving the machine, hold the middle part of the machine, and not the control 

panel or document feeder area. Excessive pressure on the document feeder may 
cause machine malfunction.