Xerox 123 Software Guide

Output Destination - Specifies the output destination.
NOTE: The items that can be selected vary according to whether the optional side tray 
kit or finisher has been installed.

Offset Stacking - The position of individual jobs or sets of copies are shifted to either 
side of the output tray to enable easy separation.
Feed Separators from - Specifies the paper tray that transparency dividers are to be 
fed from. When [Auto] is selected, the tray set on the machine is used as the feed 
destination.
Print on Separators - Specifies whether or not to print on the transparency dividers as 
well as the transparency.
Paper Type (Separators) - Specifies a paper type for the transparency divider.
Stapling - Specifies whether or not to staple printed documents and the position of the 
staple. You can staple 2 to 50 sheets of 80 g/m

2

 or lighter paper.

NOTE: You cannot use staples in the following situations.

– When anything other than Finisher Tray is selected as the Output Destination in 

the Advanced tab.

– When Job Offset is selected.

Bypass Feed Orientation - Specifies the paper orientation when printing from the 
bypass tray. When feeding the short edge of the paper first, select [Landscape]. When 
feeding the long edge of the paper, select [Portrait].
Print Mode - Specifies whether to give priority to the print speed or the image quality.
Halftone - Specifies the halftone settings for printing.
Select [Fine Dots] for the small size halftone dot commonly used in PostScript.
Select [Thick Dots] for coarser dots than the Fine Dots setting.
Select [Type 3] for the same halftone setting that is used in PCL.
Image Enhancement - Specifies whether or not to use the Image Enhancement 
function. Selecting [On] smooths out boundaries when printing. This reduces jagged 
edges by artificially increasing the resolution of the image. When printing a bitmapped 
image composed of coarse halftone dots, smooth color gradation is impossible in 
certain situations. In this case, select [Off].
Draft Mode - Specifies whether or not to reduce the amount of toner used when 
printing drafts. When [On] is selected, the overall printed color becomes lighter. This is 
best for printing documents when high print quality is not necessary.
Custom Paper Auto Orientation - Specifies whether or not to correct the orientation 
of the custom paper.