Xerox 123 Software Guide

network in the TCP/IP(LPD) environment. Otherwise, select [Network printer]. The 
following is an example of a Local printer.

NOTE: When you select [Local printer], deselect the “Automatically detect and install 
my Plug and Play printer” check box.

NOTE: Specify the target printer in the Connect to printer dialog box if you selected 
[Network printer]. 

Select the port you are using and click [Next]. 

When the printer is connected in the TCP/IP(LPD) environment:

1) Click [Create a new port].
2) Select Standard TCP/IP Port in the Type list and click [Next].
3) Click [Next]. 
4) Enter the IP address of the printer in Printer Name or IP Address, then click 

[Next]. 

Click [Finish] in the dialog box that will be displayed.

Insert the PostScript Driver Library CD-ROM in the CD-ROM drive. 

Click [Have Disk]. 

Enter “Drive Name:\English\PrinterDriver\win2000” in the “Copy manufacturer’s 
files from:” box and click [OK].
In this guide, we have used “E:” as the CD-ROM drive. If you are using a different 
drive for the CD-ROM, specify accordingly.

NOTE: Click [Browse] to specify a folder on the CD-ROM. 

Select your printer model from the Printers list and click [Next]. 

Enter the printer name, set whether you want to use it as the default printer, and 
click [Next]. 

Select [Do not share this printer] and click [Next]. 

We recommend that you install the driver on each computer with the procedure 
appropriate to the Operating System. 

Specify whether or not to print a test page, then click [Next]. 

After confirming the settings displayed, click [Finish]. 

NOTE: If the dialog box “Digital Signature Not Found” appears, click [Yes] to continue 
the installation.

Installation begins.

Confirm that the printer has been added in the Printers window. 

This completes the installation of the printer driver. Remove the CD-ROM from the 
drive.
See Device Options and Print Settings on page 30 to configure the printer. 
Store your CD-ROM in a safe place.