Xerox 123 Software Guide
5 Operation on Macintosh Computers
44
Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide
2.
Check that the machine’s port is set to Enable.
– When using AppleTalk, set the EtherTalk port to Enable.
– When using IP Printing, set the LPD port to Enable.
You can check the EtherTalk and LPD settings in the System Settings List. See the
User Guide for details about how to print the “System Settings List.”
– When using IP Printing, set the LPD port to Enable.
You can check the EtherTalk and LPD settings in the System Settings List. See the
User Guide for details about how to print the “System Settings List.”
3.
Start [Print Center].
NOTE: You can find Print Center in the Utilities folder in the Applications folder.
4.
When the Printer List screen opens, click [Add].
5.
Select the protocol used to connect the printer.
When using AppleTalk
®
1.
Select [AppleTalk] from the menu, and specify the zone for the printer being used.
2.
Select the printer you are using from the list.
3.
Select [Auto Select] from Printer Model.
4.
Click [Add].