Xerox 123 User Manual

This feature allows you to scan mixed sizes of documents using the document feeder 
at the same time and save them in a single file.
NOTE: To enable the feature, select [Auto Size Detect] on the [Scan Size] screen.

Select [Mixed Size Originals] on 
the [Scan Options] screen.

Select [On] to enable the 
feature.

Select [Save].

When scanning bound documents or scanning with the document feeder or document 
glass cover open, black marks may appear around the edges or on the center binding 
area of the output. These marks can be erased using this feature.

Select [Border Erase] on the 
[Scan Options] screen.

Perform the necessary 
operations.

Select [Save].

Normal
Uses the default values for the edge or center area to be erased. The default values 
are set in [Variable Erase]. If you do not want to erase any edge and/or center area, 
select [Variable Erase] and then select 0.0 using the scroll buttons.

Variable Erase
Allows you to adjust the edge or center area to be erased. Enter the amount you want 
to erase from the top, bottom, right, left, and center margins. Up to 50 mm (2 inches) 
can be entered.

• Head to Top – Select to position documents with the head of the document away 

from the operator.

• Head to Left – Select to position documents with the head of the document to the 

operator’s left. For this orientation, documents are scanned so that the head of 
scanned result is away from the operator.