Xerox 123 User Manual

SMTP Authentication User Name – Specify the user ID for 
SMTP authentication.
SMTP Authentication Password – Specify the password for 
SMTP authentication.
Domain Filtering - Receive – Allows you to specify whether 
to restrict incoming e-mail.
Permitted Domain – Enter the domain name to permit 
incoming mails when Domain Filter is enabled.
HTTP
Allows you to configure the HTTP protocol settings as 
follows.
Port Number – Enter the port number that receives requests 
from the browser.
Maximum Sessions – Enter the maximum number of 
sessions between 1 and 15.
Connection Time-Out – Allows you to specify the connection 
time-out period when transmission fails.
UPnP
Allows you to specify the port number for UPnP.
Port Number – Specify the UPnP port number.
SSDP
Allows you to configure the SSDP protocol settings as 
follows.
Valid Advertising Period – Specify the time during which the 
advertising period remains valid.
Maximum TTL – Specify the maximum TTL.
LDAP
Allows you to configure the LDAP protocol settings as 
follows.
LDAP Server Address – Enter the LDAP server address.
Port Number – Specify the LDAP port number.

Print Mode
Allows you to specify the type of printer language to use 
when a print job is sent using Parallel, USB, EtherTalk, SMB, 
NetWare, LPD, IPP, or Port9100. Only the enabled protocol 
will be displayed.
Auto – Allows you to set the machine so that it will 
automatically determine and use the most suitable language 
to print data received from the host device.
PostScript – Sets PostScript as the printer language.
PCL – Sets PCL as the printer language.
TIFF – Sets TIFF as the printer language.
PJL – Allows you to enable or disable PJL. PJL is a 
command independent of printer languages. You can specify 
the printer language to use for the next job regardless of the 
printer language that is currently being used.