Xerox 123 User Manual

Sets the default tray for output. If the machine is equipped with the finisher, select 
[Center Output Tray] or [Finisher Tray].
NOTE: Before using the Center Output Tray, it must be enabled through the Extended 
Tray Module setting. Refer to Extended Tray Module on page 200.

NOTE: When the staple function is used, the output tray changes to [Finisher Tray] 
automatically.

Sets the default for [Position] of [Stamp] in the [Annotation] feature on the [Output 
Format] screen.

Sets the default for [Position] of [Date] in the [Annotation] feature on the [Output 
Format] screen.

Sets the default for [Style] of [Page Number] in the [Annotation] feature on the [Output 
Format] screen.

Sets the default for [Position] of [Page Number] in the [Annotation] feature on the 
[Output Format] screen.

Use this feature to implement operational control of the various copy features.
The [Copy Control] screen consists of multiple pages.

Select [Copy Control] on the 
[Copy Mode Settings] screen.

Use the scroll buttons to switch 
between screens.

Perform the necessary 
operations.

Select [Close].

If the hard disk becomes full while reading documents, a message asking how to 
process the data read up to that point is displayed. You can predefine a processing 
method to be performed after the message has been displayed for a specified period. 
If you select [Cancel Job], the data will be discarded. If you select [Run Job], the data 
read up to that point will be processed.