Xerox 123 User Manual

Auto Eject Time
Specify the time-out period when print data is not sent to the machine sequentially. If 
the specified time elapses, the remaining data inside the machine is automatically 
printed out. You can enter a time within the range of 5–1,275 seconds in 5-second 
increments.

Adobe Communication Protocol
Specify the communication protocol format for Adobe Communication Protocol.

• Standard – Select this option when the communication protocol is in the ASCII 

format.

• Binary – Select this option when the communication protocol is in the binary format. 

Depending on the data, the print job may be completed faster than [Standard].

• TBCP – Select this option to switch the specific control codes when the 

communication protocols involve both ASCII and binary formats.

Use this feature to specify whether to enable the LPD port.

Use this feature to specify whether to enable the NetWare port.

Use this feature to specify whether to enable the SMB port.

Use this feature to specify whether to enable the IPP port.

Use this feature to specify whether to enable the EtherTalk port.

Use this feature to specify whether to enable the Salutation port. This setting item is 
available only when the hard disk is installed on the machine.

Use this feature to specify whether to enable the Port9100 port.

Use this feature to specify whether to enable the SNMP agent.

Use this feature to specify whether to enable the FTP Client port. This setting item is 
available only when the hard disk is installed on the machine.