Xerox 123 User Manual

More
Displays the [Paper Supply] screen.

Allows you to select a paper tray from up to five preset trays including the bypass tray.

Select [More] for the [Paper 
Supply] feature on the [Basic 
Copying] screen.

Select the required option.

Select [Save].

Auto
Refer to the [Auto] option explained previously.

Presets
Allows you to select a paper tray from up to four presets.

Bypass
Displays the [Tray 5 (Bypass)] screen.

You can temporarily use the bypass tray to load paper that is unavailable from the 
preprogrammed trays. Up to a 10 mm or 0.4 inch stack of paper (approximately 95 
sheets of 80 g/m

2

 paper) can be loaded into the bypass tray. Follow the steps below to 

make full use of the bypass tray.

Select [Bypass Tray] on the 
[Paper Supply] screen.

Select the required option.

Select [Save].

• Auto Size Detect – Automatically senses the paper size fed from the bypass tray.

• Standard Size – Displays the preset paper sizes on the touch screen, and allows you 

to select the paper size from the displayed paper size. The preset paper size is set 
up by Key Operator.

• Non-standard Size – Allows you to specify the width and length of paper size using 

the scroll buttons in 1 mm (0.1 inch) increments. The acceptable ranges of paper 
sizes are 89–297 mm (3.5–11.7 inches) for width and 99–432 mm (3.9–17.0 inches) 
for length.