Xerox 123 User Manual

This guide includes instructions for:

■

■

The System Administrator Guide contains detailed information about network setups. This document is 
intended for setting up the network using TCP/IP. If using Novel IPX, see the System Administrator Guide 
for setup procedures.

Confirm that an existing operational network utilizing TCP/IP is available.

Confirm that the Ethernet cable is plugged into the multifunction device and into an operational Ethernet 
port on the network.

The Ethernet cable is an RJ45 type and is not supplied by Xerox.

On startup, the multifunction device defaults to DHCP to obtain its network configurations. A DHCP server 
delivers an IP address, as well as other configuration settings to the device. If you use a DHCP server to 
allocate an IP address to the device, then proceed as follows:

Power on the device.

Wait a minute or so while the device negotiates an IP address.

Print the System Settings List.

Select the Machine Status button on the device.

Select 

.

Select 

.

Select 

.

Press the Start button.