Xerox 220 Installation Instruction
7KH'RFXPHQW&RPSDQ\
;(52;
DC220/230/332/340ST Windows NT
®
4.0 (TCP/IP) Scan to File Quick Install
Page 2 of 2
g)
Press [Save].
h)
Press [Login Name], then press
[Edit] and use the keyboard on the
screen to enter the account name for
the DC220/230/332/340ST. Case
sensitivity applies.
[Edit] and use the keyboard on the
screen to enter the account name for
the DC220/230/332/340ST. Case
sensitivity applies.
i)
Press [Save].
j)
Press [Password], then press [Edit]
and use the keyboard on the screen to
enter the password for the DC220/
230/332/340ST. Case sensitivity
applies.
and use the keyboard on the screen to
enter the password for the DC220/
230/332/340ST. Case sensitivity
applies.
k)
Press [Save].
3.
Press [Save] to return to the Scan to File
Setups screen.
Setups screen.
a)
If required, press [Repository 1] to set
up Repositories 1 through 4. Follow
the steps above to enter the setup
information.
up Repositories 1 through 4. Follow
the steps above to enter the setup
information.
4.
Press [Filing Policy]. Select the desired
Filing Policy.
Filing Policy.
5.
Press [Confirmation Sheet].
a)
Press [Enable].
b)
Press [Save].
6.
Press [Close] to return to the Scan to File
Setups screen.
Setups screen.
7.
Press [Exit].
8.
The DC220/230/332/340ST will
automatically reboot and print a
configuration sheet in approximately 3
minutes.
automatically reboot and print a
configuration sheet in approximately 3
minutes.
9.
Check the settings on the configuration
sheet against those that were entered
previously.
sheet against those that were entered
previously.
10.
Install Visioneer PaperPort
®
software at
each client workstation.
11.
Test the Scan to File feature.
12.
Verify the successful scan by checking the
Confirmation Report printed by the
DC220/230/332/340ST and by checking
the Repository on the server.
Confirmation Report printed by the
DC220/230/332/340ST and by checking
the Repository on the server.
Use CentreWare Internet Services
®
, if available
to create templates, or use the default template.
Additional information on this installation can be
found in the DC220/230/332/340ST System
found in the DC220/230/332/340ST System
Administration Guide, or the CentreWare
®
manual, Getting Started with Internet Services.
b)
Enter the System Administrator
password by typing
#22222
(# key
and 22222) on the keypad and
pressing [Enter] on the screen.
pressing [Enter] on the screen.
Note: #22222 is the factory default
and may be changed by your Xerox
service representative to suit your
needs.
and may be changed by your Xerox
service representative to suit your
needs.
2.
Access the Scan to File Setups screens:
a)
On the screen display, press [Scan to
File Setups].
File Setups].
Note: The Job Template Pool and Update All
Templates options on this screen are not used in
this environment.
Templates options on this screen are not used in
this environment.
b)
Press [Default Repository].
c)
Press [TCP/IP].
d)
Press [File Server IP Address], then
press [Edit] and use the keyboard on
the screen to enter the Repository
Server’s IP address.
press [Edit] and use the keyboard on
the screen to enter the Repository
Server’s IP address.
e)
Press [Save].
f)
Press [Directory Path], then press
[Edit] and use the keyboard on the
screen to enter the path for the
DC220/230/332/340ST account to use
to get to the Repository Directory at
the Server.
[Edit] and use the keyboard on the
screen to enter the path for the
DC220/230/332/340ST account to use
to get to the Repository Directory at
the Server.
©1999 Xerox Corporation
602E60380
602E60380