Xerox 4050 User Guide

Page of 54
 Guide to Performing Routine Maintenance
6-1
6.
Cleaning
This chapter describes the cleaning tasks you need to perform 
regularly on your printing system.
Cleaning the keyboard, monitor, and the exterior of the printer 
controller
Clean the exterior surfaces of your Printer Controller including 
monitor and keyboard, as required. Clean daily, if possible.
Use the following supplies to clean the exterior surfaces:
Monitor: Use a soft, lint-free cloth dampened with a glass 
cleaner. Do not spray the liquid directly onto the monitor since 
it may cause damage.
Keyboard: Use a mild household detergent that has been 
poured or sprayed onto a cloth lightly dampened with water. 
Do not saturate the cloth; just dampen it. 
Exterior: Use a mild household detergent that has been 
poured or sprayed onto a cloth lightly dampened with water. 
Do not saturate the cloth; just dampen it. 
CAUTION
Do not allow liquids to drip onto anything electrical or 
mechanical. For the same reason, never spray or pour the 
cleaner directly onto the keyboard or the exterior surfaces of the 
system.
Cleaning the 4mm cartridge tape drive
Clean the 4mm cartridge tape drive after every 25 hours of 
actual tape operation. Use only a cleaning cartridge designed for 
the 4mm cartridge tape drive. No fluids or other preparations are 
necessary with the use of these cartridges.