Xerox 4050 Service Manual
PRINTING JOBS
Enter one of the following commands:
CONTINUE I
Continues multicopy printing in sections. When printing is
complete, assemble the copies of the report manually.
complete, assemble the copies of the report manually.
PRINT 1
Prints only one complete copy of the report. Additional
copies can be printed by resubmitting the job from the host
once for each copy desired.
copies can be printed by resubmitting the job from the host
once for each copy desired.
ENDJOB
Prints the pages already formatted by the system and ends
the job.
the job.
ABORT O
Cancels the current report and starts to print the next
report.
report.
ABORT n
Cancels the current job. (n is the current job number.)
Checking job and printer status
You can obtain status information on the job currently printing,
the job queue, or the printer.
the job queue, or the printer.
Checking printer status
When you press <PRINTER STATUS> or enter the PSTATUS
command, the system displays the current status of the feeder
and stacker trays. You may request status information either
before or during a print job. If the system controller is occupied
with nonprint functions, it ignores the request.
command, the system displays the current status of the feeder
and stacker trays. You may request status information either
before or during a print job. If the system controller is occupied
with nonprint functions, it ignores the request.
Figure 4-1.
Printer status display
Paper trays:
Output Trays:
Feed Tray
Select: AUTO
Tray 1 8.5 X 11
IN USE
Tray 1 IN USE
Tray 2 8.5 X 14
READY
Tray 3 8.5 X 11
READY
Tray 4 8.5 X 11
READY
Stitcher: READY
Xerographic Mode:BLACK Dry Ink Color:BLACK
Attention light: ENABLED, STEADY
Blade: DISABLED
Darkness (Lightest=1, Darkest=7)
Black 4
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE
4-7