Xerox 4050 Service Manual
PRINT JOB MAINTENANCE
Unloading output trays
You can unload output trays while the system is printing.
When a stacker tray is full, the following occurs:
•
The Tray Full indicator lights on the appropriate stacker tray
(applies to dual stacker only).
(applies to dual stacker only).
•
A message displays on the printer control console that
indicates which output tray is full.
indicates which output tray is full.
•
In automatic switching mode, the system automatically
switches over to the second tray (if it is empty) when one
tray is full (applies to the dual stacker only).
switches over to the second tray (if it is empty) when one
tray is full (applies to the dual stacker only).
•
If only one tray was selected or if both output trays are full,
the printer stops.
the printer stops.
•
The picture on the graphic display shows the location of the
full tray.
full tray.
Unloading dual stacker trays
Follow these steps to unload dual stacker trays:
1. Raise the scuffer arm.
2. Remove the stack of prints.
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE
5-19