Xerox 4510 User Manual
I n t e r f a c e M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
❖
3-51
The
Ethernet Menu
, a submenu of the
Interface Menu,
Figure 3.13 (page 3-38)
, contains options for configuring the
printer’s Ethernet port,
when the Ethernet option has been
installed
.
The Ethernet option supports the following protocols:
•
Novell NetWare, Version 3.11
•
TCP/IP
•
EtherTalk
•
DEC LAT
•
Microsoft LAN Manager
For detailed information on the supported protocols, refer to
Networking: Ethernet
packaged with the Ethernet option kit.
Figure 3.17 describes each
Ethernet Menu
option. Factory
settings are
boldfaced
and followed by an asterisk (
*
). See
“Setting a Menu Option” (page 3-10)
for the steps to find and
change a setting, or refer to the
Document Services for
Printing Guide
to use the RUI to change settings.
Figure 3.17 Ethernet Menu options showing factory settings
Option
Setting
Description
Port Timeout
5-999 secs (
30*
)
Time interval for determining when to end an
incomplete print job and poll the next port in the
polling sequence.
incomplete print job and poll the next port in the
polling sequence.
Port Timeout
works in conjunction with
Auto Job
End
(page 3-53).
See
Appendix C: I/O Port Polling
for more information
on how port polling works.
System Language
PCL*
PostScript
†
†
Appears only when the
PostScript option is
installed.
installed.
Page description language (PDL) the printer will use
for print jobs coming through the Ethernet port.
for print jobs coming through the Ethernet port.
When
Lang. Sensing
(page 3-52) is
On
,
System
Language
is used only when the printer cannot
detect the PDL used in the incoming print job.
Ethernet Menu
Options
AUG-CH03 Page 51 Black,Red,Cyan Friday, February 3, 1995 12:22 AM