Xerox 4110 Information Guide

 

• 

How to find MAC address of 4110/4590 built-in Controller 

• 

How to find MAC address of 4110/4590 Fiery Controller 

• 

How to find MAC address of 4110/4590 DocuSP Controller 

 
To find the Media Access Control (MAC) address of the 4110/4590 do the following: 
1.  Print the Configuration Sheet / System Setting List 

a.  Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed on 

the Touch Screen.  

b.  Select the [Billing Meter / Print Report] tab.  
c.  Select the [Print Report / List] button.  
d.  Select the [Print Mode Settings] button.  
e.  Select the [Setting List - Common Items] button.  
f. 

Press the [Start] button on the Control Panel to print the list.  

2.  After printing the system settings sheet find the header Communication Settings (most likely on page 3 of the 

Systems Settings list), the MAC address will be under Ethernet Settings. 

 
NOTE:  In this instance, MAC refers to Media Access Control, not the Macintosh. 
 
 

To find the MAC Address on the Fiery DFE Controller: 
1. Select 

[START] 

2. Select 

[Run] 

3.  Type – cmd and then select  [OK] 
4.  In the CMD Window type – ipconfig /all – then press ‘enter’ 
5.  Read the MAC Address as the ‘physical address’ that is just above the customer’s ip address. 

 

 

To find the MAC Address on the DocuSP DFE do the following: 
1.  Log on as Administrator User 
2. Select 

[Setup] – Pulldown from top middle of screen. 

3. Select 

[Network Configuration] 

4.  Select the [Connections] Tab at top of screen 
5.  The MAC Address is displayed