Xerox 4235 Installation Instruction

iv

 XEROX 4235 LPS INSTALLATION PLANNING GUIDE

Your Xerox equipment and supplies were designed and tested
to meet strict safety requirements.  These include safety agency
examination, approval, and compliance with established
environmental standards.

Attention to the following notes ensures the continued safe
operation of your equipment.

Always connect equipment to a properly grounded power
source receptacle.  If in doubt, have the receptacle checked by
a qualified electrician.

WARNING: Improper connection of the equipment grounding
conductor can result in electrical shock.

Always locate equipment on a solid support surface (not plush
carpet) with adequate strength for the weight of the machine.

Always exercise care in moving or relocating the equipment.

Always use materials and supplies specifically designed for
your Xerox equipment.  Use of unsuitable materials may result
in poor performance and possibly a hazardous situation.

Never use a ground adaptor plug to connect equipment to a
power source receptacle that lacks a ground connection
terminal.

Never attempt any maintenance function that is not specifically
described in this 4235 LPS documentation.

Never remove any covers or guards that are fastened with
screws.  There are no operator serviceable areas within these
covers.

Never override or "cheat" electrical or mechanical interlock
devices.

Never operate the equipment if you notice unusual noises or
odors.  Disconnect the power cord from the power source
receptacle and call your Xerox service representative to correct
the problem.

If you need any additional safety information concerning the
equipment or Xerox supplied materials, call the following toll–
free number (in the USA only): 1-800-828-6571.  For additional
safety information in other countries, contact your local Xerox
representative.