Xerox 721 Service Manual
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
17
4. Media
This chapter provides the following information:
• The procedure for loading roll media into the media drawers
• The procedure for bypassing the media drawers and manually
• The procedure for bypassing the media drawers and manually
feeding pre-cut sheets into the printer
• An explanation of the dehumidifier feature.
For information about the media sizes and types that the printer
can accommodate, refer to the "Specification" chapter of this
manual.
For information about the media sizes and types that the printer
can accommodate, refer to the "Specification" chapter of this
manual.
Adding Media Rolls
When roll media in use is empty, the Media Empty Indicator on the
Operation Panel remains on steady.
Operation Panel remains on steady.
To load a new roll media, follow the instructions in the "Loading
The Roll Media" sections of this chapter.
The Roll Media" sections of this chapter.
NOTE: Roll sizes 880 mm, 891 mm and 900 mm can be loaded in Media
Drawer 1 only. The printer is set for 900 mm size. To enable
880 mm or 891 mm sizes, contact XEROX Service.
880 mm or 891 mm sizes, contact XEROX Service.
NOTE: B3 media should not be loaded in drawer 1. If B3 media is loaded
in drawer 1, the printer will report the size as either A3 or 11”
media.
media.
Exp-Clean
Wire-Clean
Paper Deck
1 2 3 4
Select
Cut
MF
D1
D2
D3
D4
PF
Exit
Copy Density
Menu
Enter
Online
Media Empty Indicator