Xerox 8142 Supplementary Manual
1
8142 / 8160 Firmware Upgrade Procedure
Note: The 8142 and 8160 printers do not allow their firmware to be downgraded; this
procedure will only function properly for firmware upgrades.
Checking Firmware Version
procedure will only function properly for firmware upgrades.
Checking Firmware Version
Step 1. Select Utility Menu - Service Menu – About
Step 2. Determine firmware level prior to downloading new firmware. Firmware
level is indicated by the Vers. (version) line.
Step 2. Determine firmware level prior to downloading new firmware. Firmware
level is indicated by the Vers. (version) line.
Software Requirements
Operating Systems:
Windows 2000/XP/XP Pro
Software Required:
Software Control Panel provided on CD with printer; EFPU (File Print Utility)
Software Control Download Procedure
Step 1. Open EFPU (File Print Utility) software.
Create a new folder (i.e. printer download)
Add firmware .rom file (choose all files to view) to EFPU window
Step 2. Download Firmware
Within EFPU program, highlight firmware file (.ROM file) and select Print.
Printer should emit a single audible beep after approximately 60 seconds.
Step 3. Verify Download was successful. Cycle power to printer.
Check the About screen for current firmware revision
Create a new folder (i.e. printer download)
Add firmware .rom file (choose all files to view) to EFPU window
Step 2. Download Firmware
Within EFPU program, highlight firmware file (.ROM file) and select Print.
Printer should emit a single audible beep after approximately 60 seconds.
Step 3. Verify Download was successful. Cycle power to printer.
Check the About screen for current firmware revision