Xerox 8830 folder Service Manual

September 2001

88XX Series Folder Operator Manual   20

Use this menu to obtain the folded prints Face Up or Face Down in the
print tray.

1.  Go to the “Face” submenu.

in the Numeric Control Panel

in the Alphanumeric Control Panel

u

OPERATOR

U3

FACE

2.  The default option is shown :

in the Numeric Control Panel

in the Alphanumeric Control Panel

u30 1

FACE UP

Lower right dot

flashing

3.  Use the scroll key to select the desired option and press Enter to

select it.

Select “FACE UP” [U3.01] to obtain all the folded prints oriented
face up.

Select “FACE DOWN” [U3.02] to obtain all the folded prints
oriented face down.

Selecting “DON’T CARE” [U3.03] tells the folder to accept every
print with all possible title block locations and orientations
LEF/SEF. With this selection the output orientation could be either
Face Up or Face Down.

4.  Select EXIT [ u3.00 ] to rise one level.

5.  Turn off the folder and then switch it on to activate the

modification.

u 3

u 3.00

u 3.01

u 3.02

u 3.03