Xerox 8000 Reference Guide
W
ELCOME
13
Shutting down and rebooting the Fiery EXP8000
You may have to shut down the Fiery EXP8000 for service. When you do, network access to
the digital press is interrupted. Before you remove or attach any cables to the Fiery EXP8000
to perform service, shut down the Fiery EXP8000.
the digital press is interrupted. Before you remove or attach any cables to the Fiery EXP8000
to perform service, shut down the Fiery EXP8000.
If necessary, you can restart the Fiery EXP8000. Restarting the Fiery EXP8000 from FieryBar
resets the Fiery EXP8000 system software without restarting the system entirely. Rebooting
the Fiery EXP8000 from the Windows Start menu restarts the system entirely.
resets the Fiery EXP8000 system software without restarting the system entirely. Rebooting
the Fiery EXP8000 from the Windows Start menu restarts the system entirely.
T
O
SHUT
DOWN
THE
F
IERY
EXP8000
1 Make sure that the Fiery EXP8000 is not receiving, processing, or printing any files.
Wait until no processing or printing jobs appear in the Command WorkStation Active Jobs
window, or FieryBar indicates Idle in the RIPping and Printing areas.
window, or FieryBar indicates Idle in the RIPping and Printing areas.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
Idle before beginning the shutdown procedure.
N
OTE
:
Before you remove the Fiery EXP8000 from the network, notify the network
administrator.
2 Shut down and turn off the digital press.
For instructions, see the documentation that accompanies your digital press.
3 Close all open applications except FieryBar.
4 Choose Shut Down from the Windows Start menu.
5 Select Shut Down and click OK.
Before you access internal components, make sure that all cables are disconnected from the
back of the Fiery EXP8000.
back of the Fiery EXP8000.