Xerox 4517 User Guide
D o c u P r i n t 4 5 1 7 Q u i c k T o u r
C h a p t e r 1 : D o c u P r i n t 4 5 1 7 Q u i c k T o u r ❖ 1-3
DocuPrint
4517 and
DocuPrint
4517mp
Models
This book is for use with both the Xerox DocuPrint 4517 and
DocuPrint 4517mp Network Laser Printers. The DocuPrint
4517mp contains all the components of the DocuPrint 4517,
plus the following options:
•
Adobe PostScript Level 2
•
4 MB additional memory
•
XNIC-E’NET (Xerox Network Interface Card for Ethernet)
As this guide serves both printers, the DocuPrint 4517mp will
hereafter be referred to as the DocuPrint 4517.
Note
Some of the features described in this book apply only to
Version 2.0 or later of the DocuPrint 4517. Version 2.0 is
defined as having system controller software version 2.00.xx
or later and XNIC version 6.1 or later (if installed). Features
that pertain only to Version 2.0 or later are designated “for
V2.0 or later.”
Version 2.0 supports all of the features of the earlier versions
and contains the following enhancements:
•
Ability to set IP Address (and Subnet Mask and Gateway
Address) via the Control Panel.
•
Support for LAA (Locally Administered Address) in the
XNIC-T’RING (and setup via the Control Panel).
•
Ability to designate the front tray as the first selected input
device for tray switching and source mapping.
•
Support for the RFC1759 Standard Printer MIB, plus Xerox
MIB enhancements, for the DocuPrint 4517 via SNMP
(enables CentreWare DP and other SNMP tools to
remotely manage the DocuPrint 4517).
•
An increase of base memory to 4 MB for the DocuPrint
4517 and 8 MB for the DocuPrint 4517mp.
•
Support for the optional serial port. The serial port is not a
customer installable option, and must be ordered as a
unique printer configuration at the time of the initial
printer order.
chapter1.frm Page 3 Friday, July 11, 1997 8:12 PM