Xerox m750 Installation Instruction
Step 4
Click Finish
The USB port for M750 or M760 is now setup on your computer.
The M750 or M760 printer driver installer program should begin momentarily. If it does not start then
click Start > Run > D:\Setup.exe. (Note that the drive assignment of the CDROM drive may be
different on you computer.)
click Start > Run > D:\Setup.exe. (Note that the drive assignment of the CDROM drive may be
different on you computer.)
Was there a problem installing USB?
◆
If the Add New Hardware Wizard does not start up after plugging the USB cable into your printer
then check that your cable is good and that USB is enabled on your computer (call your computer
manufacturer).
◆ If the Add New Hardware Wizard screens went away prior to completetion of USB install then
remove then re-insert the USB cable in your printer.
◆ We want to help you sucessfully install your printer so visit our web site or call our toll free
customer support hotline.
manufacturer).
◆ If the Add New Hardware Wizard screens went away prior to completetion of USB install then
remove then re-insert the USB cable in your printer.
◆ We want to help you sucessfully install your printer so visit our web site or call our toll free
customer support hotline.
Was there a problem selecting the USB port while installing the printer driver?
◆ Finish installing the printer driver to LPT1. Then go to Start > Settings > Printers and right click
on DocuPrint M750 (or M760) and click on Properties. Select the Details tab and then select
X750_USB0 (or X760_USB0 for M760) under Print to the following port. Select OK. You should
now be able to print to your printer’s USB port.
on DocuPrint M750 (or M760) and click on Properties. Select the Details tab and then select
X750_USB0 (or X760_USB0 for M760) under Print to the following port. Select OK. You should
now be able to print to your printer’s USB port.