Xerox N2825 User Manual

Page of 124
Macintosh Driver Installation
5-6
DocuPrint Technical Information Guide
Selecting the Printer from the Chooser
Before you send a print job to the DocuPrint printer, make 
sure that it is selected as the current printer in the 
Chooser.
1
At the printer, print a configuration sheet and note the 
printer address. Refer to the sectio
.
2
At your computer, select the APPLE in the upper left 
corner of the Desktop.
3
Select the Chooser entry in the menu.
4
Make sure that AppleTalk is active.
5
In the left window of the Chooser, click on the Adobe PS 
icon to select it. You may have to use the scroll bars at the 
right side of this box to locate the icon.
Your network may be divided into AppleTalk 
Zones. You can tell if there are zones by the 
appearance of the CHOOSER window. When the 
CHOOSER program detects multiple zones, the left 
window will be reduced in size. The lower half of 
the CHOOSER window will be a zone list. Identify, 
then select the zone in which the DocuPrint 
printer is located.
6
When you select a zone, printer names appear in a box to 
the right.
7
Select the printer address from the window to the right.
8
Click Setup...
If you do not use the DocuPrint driver, you may 
not be able to take advantage of all of the printer’s 
features.
Before continuing, make sure that the software included with 
your customer documentation set has been loaded into each 
Macintosh computer that will be sending jobs to the DocuPrint 
printer.